| CERTIFIRE approved
fire resisting metal doorsets
| • FD30 to FD240S |
|
• Unlatched & latched |
| • Single acting |
|
• Double acting |
| • Glazed vision panels |
|
• Glazed side panels |
| • Over panels |
|
• Fire damper louvres |
TASKMASTER S series
became the first fire resisting steel doorset system to be
awarded a Certificate of Approval under the CERTIFIRE
fire resisting metal doorset scheme.
The award followed a rigorous technical
appraisal by CERTIFIRE of the extensive fire tests conducted
on TASKMASTER S Series doorsets to BS 476 Part 22. |
 |
|
|
|
The scope of the
approval is probably the most extensive on the market
and is fully detailed in Taskmaster
CERTIFIRE Data sheet CF 232. This defines door
and frame construction options, doorset configurations
and maximum doorset sizes for varying periods of fire
resistance extending from FD30 through to FD240S. |
Each CERTIFIRE approved TASKMASTER doorset
carries a tamper evident label bearing a unique, fully traceable
serial number.
Most of the product design
options shown in Catalogues 203 are available with TASKMASTER
CERTIFIRE approved fire resisting doorsets
“The
presentation of a copy of a test report, even when accompanied
by a letter of assessment is not product certification.
A test report is not a certificate.
Certification is
a process involving independent third party inspection
and testing intended to ensure that the product or service
delivered to the customer complies with an agreed standard.
Only products subjected to this process can be properly
described as `Certified.' ...mere possession of a test
report and an assessment is not sufficient."
D. R. Smith, Chief Exec, DSMA,
`Fire Safety Engineering' – Dec 2000
|
Click
here to Visit Certifire's Website
|
